Whether you're cycling during the day, after sunset or in the early hours of the morning, good bike lighting is essential. Bike lights are essential when cycling at night, and it would be implausible to ride without at least one. But they are also indispensable during the day and should not be neglected. Bicycle lights provide clear visibility and ensure that other road users can see you.

Research has shown that using front and rear lights every time you drive increases visibility and reduces the risk of accidents. Therefore, when buying bicycle accessories, you should pay attention to high-quality bicycle lighting. There are different ways to mount bike lights, and even more brands are available. Fortunately, most companies offer bike light kits that allow customers to install their bike lights easily and quickly.

However, installing bicycle lights correctly is crucial for maximum benefit. In this article, we'll talk about the different ways to mount your bike lights and give you tips on how to improve the visibility of your bike lights through clever mounting. Follow the steps below to mount your bike lights and enjoy a safe bike ride.

Mounting the taillight

The seat post and the luggage rack are the two most popular locations for mounting your bicycle tail light. You can use a fixed mount that can be adjusted or a quick-release mount for easy installation. When attaching the taillight to the seat post, make sure the light sits near the top, but low enough to not be obscured by bags or other items on the rack. If your saddlebag prevents you from installing a taillight, you can use a light mount with a clip attached and attach the clip to the strap of your bag.

Bicycle rear lights make you visible to other drivers or cyclists on the road. Therefore, your taillights should be strong enough to be visible from a distance, but not so bright that they blind people behind you. The batteries need to be long-lasting to last the entire trip, and they should have adequate brightness, but not as bright as the front lights. Since taillights are designed to alert other drivers to you, they should have a long range, not just a focused beam of light. Choose a taillight that provides peripheral illumination so that approaching vehicles can see you from different angles.

Mounting the front light

The front bike light is arguably more important than the rear light. It is usually the one with the greater light intensity to fulfill its task of illuminating cycle paths and dark streets. When choosing a bicycle headlight, you should focus on your needs, e.g. B. on the type of activities, the duration of cycling and the areas in which you mainly ride. The position of the front light is important and should be carefully considered before installation. A bicycle headlight should be mounted at the correct height to improve visibility and reduce shadows from objects on the ground.

Your bike's handlebars are the best place to mount a bike headlight. You can also attach the headlight to the fork shaft, eyelet or axle of your bike. If you cannot mount the light on the handlebars of the bike, attach a stem cap light to the steerer tube to mount your front light. If your bike has a rack or fork eyelets, you can attach the front lights to the eyelets using an eyelet stub and a lamp holder. For lightweight lights, you can use a rubber quick release mount. For heavier lights, an adjustable, fixed mount is a better choice.

How to remove your lights for charging and cleaning

Bicycle lights often need to be removed for cleaning or charging. You may also want to remove the lights for storage or mount them on another bike. Be sure to choose a light mount that is easy to install, operate, and remove. While most modern light mounts attach to the bike with clips and lock the light in place, older models may use physical mechanisms to secure the light. If you need to remove a lamp from an older lamp holder, carefully remove the screws holding the lamp in the holder using a screwdriver.

Most modern bike lights are attached to light brackets that are attached to the parts of your bike. Therefore, you don't have to remove the holder to clean or charge your lights. Press the release lever on the bracket to slide the light out of the bracket. Once you have cleaned or charged the light, slide it back into the holder until you hear it click into place. Once you have reattached the lamp, close the USB port cover to prevent dust, dirt or water from entering and damaging the lamp.

Handlebar mounts

Handlebar mounts are the most common type of front light mount for bicycles as they provide sufficient height for the front light to adequately illuminate the path. It is also much easier to mount headlights on the handlebars. Headlights on the handlebars emit an even beam of light without obstructing you. There are typically two types of handlebar mounts: adjustable, fixed mounts and quick-release rubber mounts. Rubber handlebar mounts are sturdy and easy to swap between different bikes.

With adjustable, fixed mounts, you need to make sure that the mount fits the circumference of your bike's handlebars. After unscrewing the bracket and attaching it around the handlebars, mount the light and place it parallel to the ground. Secure the light and make sure the bracket stays in place. Adjustable mounts are versatile and can be used on handlebars of different thicknesses.

If you have a rubber quick-release mount, attach it to the handlebars of your bike using the strap so that the light is parallel to the ground when mounted. To attach the mount, stretch the strap around the handlebars and hook it into the notch on the strap. When using quick release front light mounts, be sure to securely attach the light and ensure it stays in place while cycling.

The need for front and rear lights cannot be overemphasized. While there is a wide range of bright and long-lasting bike lights available, a quality bike light is only of value if it is installed correctly. When mounting bike lights, it is important that they are mounted securely and in the correct locations on the bike to improve functionality. The vertical distribution of your front and rear bike lights ensures that your bike is seen by other road users regardless of the height of your bike and the height of the vehicles. Therefore, ensure that the bicycle lights are distributed evenly and unhindered. If you can't manage to install a bike light on your own, don't be afraid to enlist the help of local cyclists.

Carbon bike recommended